The stock dash in all it's glory. Not bad but it could be better.
The stock dash was basically 3 pieces, the radio, a/c conrtols, and pocket.
I have molded them into one piece, to give it a more integrated look.
First i started molding the bezel for a 9" screen to a Metra dash kit. I was shooting for a 10" but the 9" was very tight as it was. Then i molded that piece to the stock a/c control bezel.
Now i had to make room for my dvd player. After some measuring, i found that the only suitable place to mount the dvd player was just above where the shifter would sit in park. That would place it smack dab in between the a/c bezel and the pocket. So, they got molded together and i ended up with 1 piece. I kept some of the factory shapes, like the section right under the a/c and the indent on the bottom of the pocket to keep a factory look to it. This is what i came up with.
[/img]
